Atomica 3D printing system

Design in Atomica.
Make it chairside.

Bring printing, washing and curing into one connected workflow for dental models, guides, splints and provisional restorations.

Atomica dental 3D printer with a red protective coverFrom digital design to something tangible.
35 µmXY pixel size
2 platformsChoose a build size for the job
Print. Wash. Cure.Three stages, one system

The complete setup

Print. Wash. Cure.

Three tools for a complete dental printing workflow.

Dental 3D printer

01 / Print

Dental 3D printer

Print your prepared design with the platform and material profile that suit the case.

Stainless steel ultrasonic washing unit

02 / Wash

Ultrasonic washer

Remove uncured resin using the cleaning process specified for your material.

Compact UV curing unit

03 / Cure

UV curing unit

Complete the material’s prescribed post-cure, then finish and inspect the part.

Connected to your design

From screen to build platform.

  1. 01

    Design in Atomica

    Create the restoration, guide, splint or model, then export the design as an STL file.

  2. 02

    Prepare in ShapeWare

    Orient the part, add supports where required and select the appropriate printer, resin and build platform.

  3. 03

    Finish the part

    Print, wash and cure according to the validated workflow. Complete finishing and inspection for its intended use.

Built for the case in front of you

Two platforms.
Room to choose.

Use the larger platform for more capacity or the smaller platform for compact jobs. Select compatible materials for the work you do.

Large platform130 × 80 mm100 mm build height
Small platform60 × 60 mm100 mm build height
Print technology
LCD, 405 nm
XY pixel size
35 µm
Large build volume
130 × 80 × 100 mm
Small build volume
60 × 60 × 100 mm
Printer footprint
300 × 280 mm
Preparation software
ShapeWare
Design file input
STL
System stages
Printer, washer, curing unit

Manufacturer specifications. Material suitability and finished-part performance depend on the resin and validated processing settings.

A few useful answers

Before you begin.

Can I print designs from other software?

Yes. Compatible STL designs can be prepared in ShapeWare for the printer. Check the geometry, intended use and material settings before production.

Which resins can I use?

The system supports compatible third-party dental resins. Our team can confirm a suitable material and validated print, wash and cure settings for each application.

Can this print surgical guides and splints?

Yes, with appropriate dental resins and validated production settings. The intended use of the resin determines the applications it supports.

Can I purchase it with an intraoral scanner?

Yes. Atomica also offers scanner and printer packages. View the current chairside package for its equipment, training and offer details.

See it in your workflow

Build your chairside workflow.

See the complete system and discuss the applications, materials and training that fit your practice.